Get Your Free Quote…!
Horizon ensures compliance and material certification to BS EN 10204. The table below gives a summary of inspection documents, content and provision for documents to be validated for each type of certification.
| BS EN 10204 Reference | Document Type | Document Content | Document Validated by |
| Type 2.1 | Declaration of compliance with purchase order | Statement of compliance with purchase order | Manufacturer |
Type 2.2 |
Test report | Statement of compliance with purchase order with indication of results of non-specific inspection | Manufacturer |
Type 3.1 |
Inspection certificate 3.1 | Statement of compliance with purchase order with indication of results of specific inspection | Manufacturer's authorized inspection representative independent of the manufacturing department |
Type 3.2 |
Inspection certificate 3.2 | Statement of compliance with purchase order with indication of results of specific inspection | Manufacturer's authorized inspection representative independent of the manufacturing department, and either the purchaser's authorized inspection representative or the inspector designated by official regulations |
Horizon implements strict quality checks as per the internal quality assurance procedure and Inspection Test Plan (ITP). The quality department functions independently of manufacturing departments.
All certificates as per EN 10204 Type 3.1 and 3.2 are only signed and issued by a fully trained and competent QC Engineer who has the capabilities to assess, review and co-relate material with the material test certification and check with appropriate specified material standards. This QC Engineer is independent of production or other manufacturing departments, but is familiar with material codes, mandatory and supplementary testing requirements, mechanical and chemical properties and selection of material. The engineer engages with, co-ordinates, and performs tests in presence of external inspection agencies and/or customer's representatives. Documents are signed jointly in accordance with contractual requirements.
our lined product are designed to withstand full vacuum at 200 deg c
Pipes lined by Thermalok® Process
